Untitled Document

Specification

Hagglunds Hydraulic Motor

CA Series

Full Displacement						Half Displacement
Model	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Max. Pressure bar	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Ratio
CA 50 20	1256	20	400	400	350
CA 50 25	1570	25	350	400	350
CA 50 32	2010	32	280	400	350
CA 50 40	2512	40	230	350	350
CA 50	3140	50	200	280	350	1570	25	200	280	01:02
CA 70 40	2512	40	270	400	350
CA 70 50	3140	50	225	320	350	1570	25	225	320	01:02
CA 70 60	3771	60	195	275	350	1886	30	195	275	01:02
CA 70	4400	70	180	240	350	2200	35	180	240	01:02
CA 100 40	2512	40	390	400	350
CA 100 50	3140	50	320	400	350
CA 100 64	4020	64	260	390	350
CA 100 80	5024	80	220	310	350	2512	40	220	310	01:02
CA 100	6280	100	190	270	350	3140	50	190	270	01:02
CA 140 80	5024	80	245	340	350
CA 140 100	6280	100	205	275	350	3140	50	205	275	01:02
CA 140 120	7543	120	180	245	350	3771	60	180	245	01:02
CA 140	8800	140	170	220	350	4400	70	170	220	01:02
CA 210 160	10051	160	105	150	350	5026	80	105	150	01:02
CA 210 180	11314	180	100	135	350	5657	90	100	135	01:02
CA 210	13200	210	85	115	350	6600	105	85	115	01:02

CB Series

Model	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Max. Pressure bar
CB 280-240	15100	240	53	68	350
CB 280	17600	280	44	58	350
CB 400-240	15100	240	94	125	350
CB 400-280	17600	280	73	105	350
CB 400-320	20100	320	71	94	350
CB 400-360	22600	360	59	82	350
CB 400	25100	400	58	75	350
CB 560-440	27600	440	49	65	350
CB 560-480	30200	480	48	62	350
CB 560-520	32700	520	41	57	350
CB 560	35200	560	40	53	350
CB 840-600	37700	600	30	45	350
CB 840-640	40200	640	28	41	350
CB 840-680	42700	680	27	40	350
CB 840-720	45200	720	25	37	350
CB 840-760	47800	760	23	34	350
CB 840-800	50300	800	23	34	350
CB 840	52800	840	21	32	350

Marathon Series

Model	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Max. Pressure bar
MA 141	8890	141	56/80	350	254
MA 200	12575	200	38/55	350	254
MB 283	17768	283	38/50	350	390
MB 800-283 "1	17768	283	80/130	350	515
MB 400	25145	400	28/35	350	390
MB 800-400 "3	25145	400	36/50	350	515
MB 800-400 "1	25145	400	56/95	350	515
MB 1150-400 "1	25145	400	90/125	350	1031
MB 566	35561	566	28/35	350	515
MB 1150-566 "1	35561	566	70/110	350	1031
MB 800-575 "1	36121	575	42/65	350	515
MB 800	50265	800	18/25	350	515
MB 800-800 "2	50265	800	28/45	350	515
MB 1150-683 "1	42899	683	62/90	350	1031
MB 1150-800 "1	50258	800	55/75	350	1031
MB 1150-975 "1	61249	975	40/62	350	1031
MB 1150	72241	1150	38/53	350	1031
MB 1600-1375 "1	86392	1375	30/43	350	1031
MB 1600	100529	1600	28/38	350	1031
MB 2400-1725 "1	108383	1725	22/33	350	1546
MB 2400-1950 "1	122520	1950	22/30	350	1546
MB 2400-2175 "1	136657	2175	18/27	350	1546
MB 2400	150794	2400	16/24	350	1546
MB 3200	201059	3200	10/16	350	1580
MB 4000	251323	4000	8/12	350	1580

Viking Series

Full Displacement						Half Displacement
Model	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Max. Pressure bar	Displacement cm3/rev	Torque Nm/bar	Rated Speed rpm/min	Max. Speed rpm/min	Ratio
44-03300	3325	53	100	200	320	1662	26	100	200	01:02
44-04700	4710	75	100	200	320	2356	37	100	200	01:02
44-06800	6790	108	90	170	320	3393	54	90	170	01:02
44-09200	9240	147	80	145	320	4618	74	80	145	01:02
64-11100	11080	176	70	120	320	5542	88	70	120	01:02
64-13500	13499	215	60	110	250	6750	107	60	110	01:02
64-16300	16340	260	50	100	250	8171	130	50	100	01:02
84-14800	14840	236	55	90	320	displacement減少不推薦使用
84-17900	17961	286	55	85	320
84-21300	21375	340	55	80	320
84-25100	25090	399	55	75	320
84-38000	38000	605	40	60	250
84-22300	22300	355	55	55	320	11150	177	60	85	01:02
84-33800	33780	538	35	35	250	16889	269	50	70	01:02
84-25100	25090	399	40	55	250	8362	133	45	75	01:03
84-38000	38000	605	25	35	250	12667	202	35	60	01:03
84-25100	25090	399	40	55	250	16724	266	45	75	02:03
84-38000	38000	605	25	35	250	25334	403	35	60	02:03

*) All motor types can be tandem mounted.
**) Special considerations regarding charge pressure, cooling and choice of hydraulic system for speeds above rated.
***) The motors are designed according to DNV-rules. Test pressure 420 bar/6000 psi. Peak/transient pressure 420 bar/6000 psi maximum, allowed to occur 10 000 times.
More options with different torques and speeds are available. This data covers the main sizes of our Compact motors.